16 independent receiver channels • Eight independent Transmitter Channels • Eight Independent Transmitter channels • Label matching for all receiver channels eight x16 bits A/D channels • One 64 Kword SRAMs buffer for storing data • Burst and continuous mode for transmitting data at the rate of 100 ms to 1,200 ms • 8/32 MHz IP clock

Suitable for PCI /PCI-X • PCIe and PMC compliant design • 4 lane - PCI/PCI-X speed • LED's for status: power, PCIe lane, and PMC installed • Tsi384 bridge for higher performance than PEX based designs • 32 or 64 bit operation at 33, 66, 100, or 133 MHz • DMA and Interrupts supported • Matched length, differentially routed, impedance controlled rear IO from Pn4 • Local power supplies using +12 V from PCIe connector • ±12 (1 A+), 5 (10 A), 3.3(10 A) supplied to PMC • Zero Slot Fan options using the thickness of the PCB plus special low profile fans to reduce the rear dimension to the legal PCI height • Front side clearance is fully compliant with the carrier height requirement on slot 2 • Need more than 64 watts – request the additional power cable

One COM port can be split to 254 virtual ports • One COM port can be opened by several applications at the same time • Several COM ports can be joined to one virtual port • READ/WRITE or READ ONLY mode mode for split serial ports • READ/WRITE or WRITE ONLY mode mode for joined serial ports • Once created, virtual serial ports are operable at each system startup

Works as well as with remote USB devices as with local ones • Unlimited USB devices can be shared on server • Unlimited USB devices can be accessed from client • Wide variety of USB devices is supported • Auto-sharing of new USB devices • Auto-sharing exclude list

d visible laser source is a visible red laser source, which is mainly used in finding fiber faults accurately

Depending on the intended use, this array of transceivers support distances varying from 500 m to 100 km • Completely compatible with most popular SFPs, for example, CISCO’s SFPs • Depending on the intended use, the transceivers support distances varying from 500 m to 100 km

Stand-alone UHF Gen 2 RFID Reader/Writer, GAO Model 236007, is compatible with both EPC Class1 GEN 1 and GEN 2 protocols and operates in the 860-960 MHz band, supporting both North American and EU standards

d using the new NXP XM chip together with the 96-bit EPC-memory, this RFID tag is particularly useful for tracking returnable transit items such as wooden pallets in the supply chain

High resolution backlight LCD • Smart navigation mode displays •  Extensive error and alarm generation, detection and indication • Histogram analysis of alarm and error events • Save/Recall of up to 10 user-defined setups and 10 sets of results • Up to 6 operation hours from a single battery charge

General 6U single-slot • PCI Express external cabling Rev 1.0 • Connection Bandwidth at 10 Gbps • VME 64x Master/Slave with Slot 1 • Multi-chassis capability • 2 PMC/XMC slots • Shared Memory Power dissipation < 12W • PCI Express Switch • 6 ports PCIe x4 Switch• Non transparent bridging • Hot Plug • Non Blocking • Support for Dual Cast • VME • VME Slot 1 • Three or five rows (support for legacy crates) • VME64x with 2eSST • Resource mapping through scatter/gather • Slave access to Shared Memory • Up to 1 GB • High bandwidth. low latency • Doorbells and semaphores • PMC/XMC • Two IEEE 1386.1 slots • PCI 3.0 32-bit at 33/66 MHz • Connection to VME P2 • DMA controller • Four channels with chaining • Any source/destination • VME • PCIe • Shared Memory • Software • Support for Linux and Windows • Device Driver provided for VME transparent access, Interrupt handling, and DMA control

A single slot adapter available in 2 GB to 128G • MTBF which is greater thana 1,000,000 hours with built in EDC/ECC and Wear Leveling algoritms • Erase/Write Cycles greater than 1,000,000 • Built in Flash SSD controller/bridge that supports Ulta DMA modes with yield data transfers at speeds of up to 133 MBps per channel • Supports RAID 0, RAID 1, RAID 0+1, RAID 5, or JBOD • Stripping modes transfers data to all 4 channels simultaneously while mirror modes transfers data on both channels • Single card card solution for non-rotating media requirements • Ships with Windows and Linux device drivers along with RAID management utilities

 Offers the same features and fucntionality as another 1U server but in a smaller footprint.• 15.5" Short Depth 1U rackmountable chassis • Redudant hot swap power supplies • Hot Swap 2.5" drive caddies • Cold Swap spare 2.5" drive caddy • Optional front LCD • Spare fans for onsite serviceability • Ruggedized chassis w/ stabilizing bars • Front air filtration system

4-Ch Real-time support CIF, HD1 with Mouse • IR controller • VGA port • Supports Max 500G HDD with 50 day recording file • Support USB backup • H.264 Standalone DVR Built-in 3.5” LCD • 4-Ch Real-time support CIF, HD1• Alarm

5U Heavy Duty Industrial Chassis

Front 5-pin DIN keyboard connector •Fault Resilient Design

RoHS compliant design • 2 x front-accessible USB ports • 1” x 5.25" and 1” x 3.5" HDD drive capacity • 3 cm x 4 cm cooling fans

2 x front-accessible USB ports • RoHS compliant design • 6” x 5.25” drive capacity • 5 cm x 8 cm cooling fans

4 cm x 8 cm cooling fan with easy replaceable fan filter • RoHS compliant design • 6 x 5.25," 1 x 3.5" drive bays

RoHS compliant design • 2 x USB on front panel • 2 x 8 cm cooling fans with easy replaceable fan filter • 1 x 5.25", 1 x front accessible 3.5," 1 x 3.5" HDD

full size wall mount chassis

RoHS compliant design • Front panel with keylock • 1 x 3.5” FDD, 1 x 5.25”, 1 x 3.5” HDD drive capacity • 2 cm x 8 cm cooling fans with easy replaceable fan filter

RoHS compliant design • Compatible with ATX, MircoATX and Mini-ITX form factor motherboard • Up to seven expansion slots • 2 cm x 8 cm cooling fans

Front bezel with lock for data security and protection • Removable and washable air filter for dust-free server interior • Superior cooling through front air intake • Front access dual USB port • Power on/off, system reset and LEDs for HDD and LAN • Three external 5.25” bays supported • One external 3.5” bay supported • Two internal 3.5” HDD supported • Hold down bar to ensure that expansion cards are locked into position • PS/2 size single or redundant power supply options • Two rear fan slots for upgrade

Enhanced Rackmount Chassis • Strong cooling system and intelligent thermal supervising control • Full-size deep expansion cards supported • Supports all specification (EEB3.5) such as Intel Dual Xeon, Intel Dual Xeon Nocona, Intel Socket 478 P4 or Socket 775 P4 as well as AMD Dual Opteron • Supports most PS2 power supply or redundant power supply assembly without any special mounting brackets

Enhanced Rackmount Chassis • Strong cooling system and intelligent thermal supervising control • Full-size deep expansion cards supported • Supports all specification (EEB3.5) such as Intel Dual Xeon, Intel Dual Xeon Nocona, Intel Socket 478 P4 or Socket 775 P4 as well as AMD Dual Opteron are all compatible • Supports most PS2 power supply or redundant power supply assembly without any special mounting brackets

Support 12 x 9.6" ATX Motherboard • Chassis Depth 14" • 300 W-500 W PS2 single or redundant Power Supply • Supports 2 x 5.25" CD • Supports 6 x 3.5" HDD Bay

Supports the newest Intel Socket 775 P4, Socket 478 P4, AMD single processor based platforms • Supports 12” x 9.6" ATX Motherboard • Chassis depth 18.8" • 300 W-500 W PS2 single or redundant power supply • Supports 3” x 5.25" CD • Supports 1” x 3.5" FDD or HDD • Supports 6” x 3.5" HDD bay

Supports the newest Intel Socket 775 P4, Socket 478 P4, AMD single processor based platforms • Support 12” x 9.6" ATX Motherboard • Chassis depth 17.71" • 300 W-500 W PS2 single power supply • Supports 3” x 5.25" CD • Supports 8” x 3.5" HDD bay

Supports the newest Intel LGA 771 Dual Core Xeon, AMD socket F 1207 Dual Core Opteron • Support 12" x 13" ATX motherboard • Chassis depth 21.25" • 300 W-600 W PS2 single power supply • Supports 3” x 5.25" CD • Supports 8” x 3.5" HDD bay

Supports the newest Intel LGA 771 Dual Core Xeon, AMD socket F 1207 Dual Core Opteron. • Supports 12" x 13" eATX DP Motherboard • Chassis Depth 26" • 300 W-850 W PS2 single or redundant power supply • Supports 8” x 5.25" CD bay • Supports 1x 3.5" HDD or FDD

Enterprise HD intelligent 4U rackmount server • Supports the newest AMD Dual Opteron, Intel Socket 775 P4, Socket 478 P4, Dual Xeon, Dual Xeon Nocona • Supports 12" x 13" eATX DP Motherboard • chassis depth 25" • 950 W 3U single or redundant PS • Supports 24” x 3.5" hot swap mobile racks • 1x 5.25" CD bay • 1 x 3.5" HDD bay

Supports the newest AMD Dual Opteron, Intel Socket 775 P4, Socket 478 P4, Dual Xeon, Dual Xeon Nocona • Supports 12" x 13" eATX DP motherboard • Chassis depth 25" • 650 W~950 W PS2-3U single or redundant PS • Supports 16” x 3.5" hot swap mobile racks • 2x 5.25" CD bay

Supports the newest AMD/Tyan Quad Opteron S4880/S4882/S4882-D/S4881, Quad Opteron/Dual Core platforms • Supports Tyan S4882, S4881 Motherboards • Chassis depth 27" • 950 W redundant power supply • Supports 12x 3.5" hot-swap mobile racks • 2x 5.25" CD-ROM • 1x 3.5" FDD or HDD bay

Supports the newest AMD/Tyan 8-way Opteron S4881/M4881 platform • Supports Tyan S4881 + M4881 motherboard • Chassis depth 29" • 1350 W redundant power supply • Supports 12x 3.5" hotswap mobile racks • 1x 3.5" HDD • 1x slim CD • 1x 3.5" FDD bay

RoHS compliant design • 2x USB ports on front panel • 1x front-accessible 3.5” and 1x 3.5” HDD drive capacity • Hot-replaceable 8 cm cooling fan • 19” rack-mountable carrier (optional)

19" TFT LCD • Intel Pentium 4/Celeron D LGA775 800 MHz CPU up to 3.8 GHz • Dual DDR 400 MHz DIMM socket up to 2 GB • Dual SATA -150 with RAID 0,1 function support • Dual Gigabit Ethernet support • IP 65 compliant aluminum front panel

15" open frame LCD monitor with optional touch • Plug-N-Play VGA interface • Easy on screen display • Analog RGB input • Touchscreen optional

17" Industrial open frame LCD with optional touch • Plug-N-Play VGA Interface • Easy on screen display • Analog RGB input • Touchscreen optional • Optional composite, S-Video, DVI input • Industrial grade

19" Industrial open frame LCD with optional touch • Plug-N-Play VGA Interface • Easy on screen display • Analog RGB input • Touchscreen optional • Optional composite, S-Video, DVI input • Industrial grade

10.4" Industrial Open Frame LCD with optional Touch • Plug-N-Play VGA Interface • Easy On Screen Display • Analog RGB Input • Touchscreen optional • Optional Composite, S-Video, DVI input

12.1" Industrial Open Frame LCD with optional Touch • Plug-N-Play VGA Interface • Easy on screen display • Analog RGB input • Touchscreen optional • Optional Composite, S-Video, DVI input • Industrial-grade

17" Industrial high brightness Open Frame LCD with optional Touch • Sunlight readable • High brightness • Plug-n-play VGA Interface • Easy on screen display • Analog RGB Input • Touchscreen optional • Industrial grade

15" Industrial High Brightness Open Frame LCD with optional Touch • Sunlight Readable • High brightness • Plug-N-Play VGA Interface • Analog RGB Input • Touchscreen optional • Industrial-grade

Sunlight Readable • High brightness • Plug-n-play VGA interface • Easy on screen display • Analog RGB input • Touch screen optional • Industrial grade

Plug-n-play VGA interface • Easy on screen display • Analog RGB input • Touch screen optional • Touch screen optional • Industrial-Grade

Plug-n-play VGA interface • Easy on screen display • Analog RGB input • Touch screen optional • Industrial grade

Enhanced boundary scan software to improve integration with NI LabVIEW graphical programming environment • PXI card will enable users of PXI chassis to leverage ability to debug, test, and program complex Ball Grid Array (BGA) populated printed circuit boards and systems from within a integrated PXI test platform • PXI system users also running National Instruments’ LabVIEW software get the added advantage of a full set of Virtual Instruments (VIs) to interface to the XJTAG system